M6 X 1.0 D3 3 FLUTE HIGH SPEED STEEL SPIRAL POINT PLUG TAP
TAPPING DEPTH: 1"
OVERALL LENGTH: 2-1/2"
SHANK DIAMETER: .255"
34806
MADE IN USA
Technical Specifications| Type | General Purpose |
| Class | Metric |
| Brand Name | Onyx |
| Flute Type | Spiral Point |
| Finish | Black |
| Pitch Diameter Limit | D5 |
| Chamfer | Plug |
| Pitch | 1.00 |
| Harmonized Tariff Code | 8207.40 |
| List No. | 2101M |
| Diameter | M6 |
| Material | High Speed Steel |
| Overall Length | 2.5 |
| Origin | Made In U.S.A. |
| Number of Flutes | 3 |
| Coating | Steam Oxide Over Nitride |
| Package Quantity | 1 |
| Thread Length | 0.625 |
| Neck Length | 0.375 |
| UPC Code | 686125348069 |
- ONYX TAP - for tapping a wide range of materials up to 28Rc hardness.
- CNC Style enchances chip evacuation and cutting fluid flow to the cutting teeth for reduced friction, heat and galling. Also reduces contact between the tap and the workpiece.
- Spiral Point Taps are designed for effcient tapping of through holes and blind holes with adequate depth for chip accumulation at the bottom of the hole. The shearing action of the point provides freer cutting action and ejects the chips ahead of the tap, eliminating chip evacuation problems and chip damage to the threads. Shallower flutes also result in greater tap strength, allowing for higher cutting speeds.
- Steam Oxide over Nitride increases wear resistance, reduces friction, reduces galling and chip welding, improves chip flow and increases tap lubricant retention. NOT RECOMMENDED FOR NON-FERROUS MATERIALS.
